Aquarium Accessories / Aquarium Hardware

Item # TS-PCHH

The Pipe Clamp Hose Holder

• The pipe clamp is perfect for holding hose over the edge of a tank.
• Suitable for glass up to 10mm.
• Will hold up to 16mm hose.
• Excellent for assisting with water ...

Item # AP-BH-1/2

Aquarium Bulkhead with O Ring ABS 20mm Inner Dia Thread

• Overall size: 46mm dia
• Diameter is measured as internal sizing
• Made from ABS Plastic
• Recommended to use "Transition Cement" (normally green in colour) if gluing to PVC ...

Item # AP-BH-1.5

Aquarium Bulkhead with O Ring ABS 48mm Inner Dia Thread

• Overall size: 97.5mm dia
• Diameter is measured as internal sizing
• Made from ABS Plastic
• Recommended to use "Transition Cement" (normally green in colour) if gluing to ...

Item # AP-BH-2

Aquarium Bulkhead with O Ring ABS 60mm Inner Dia Thread

• Overall size: 94mm dia
• Diameter is measured as internal sizing
• Made from ABS Plastic
• Recommended to use "Transition Cement" (normally green in colour) ...

Item # MX-ALBC-6

Acrylic Lid Corner Bracket 6mm

• Overall size: 55mm x 39mm x 18mm
• Acrylic thickness: 2.5mm
• Gap size: 6mm

Item # MX-ALBC-8

Acrylic Lid Corner Bracket 8mm

Item # MX-ALBC-10

Acrylic Lid Corner Bracket 10mm

Item # MX-ALB-6

Acrylic Lid Edge Bracket 6mm

• Overall size: 55mm x 39mm x 18mm
• Acrylic thickness: 2.5mm
• Gap size: 6mm

Item # MX-ALB-8

Acrylic Lid Edge Bracket 8mm

Item # MX-ALB-10

Acrylic Lid Edge Bracket 10mm

Item # MX-ALB-12

Acrylic Lid Edge Bracket 12mm

Item # GPS-BH20A-KIT

Aquarium Bulkhead Kit

• Made from moulded, impact resistant PVC.
• 19mm hose adapter included
• 25mm threaded fitting on outside.
• Bulkhead fitting with rubber washer. Overall length ...More info...
  
  
  Your Price AU$12.95
  (Was AU$29.95 you save AU$17.00

Item # TS-BH32-S

Aquarium Bulkhead and Valve Tap Fitting Set 1 inch BSPT

• Size: Internal Thread dia 32mm
• Suit 46-50mm dia glass hole size

Item # TS-BH20-8mm

Aquarium Bulkhead and Valve Tap Fitting Set 1/2 inch BSPT to 8mm

• Size: Approx 15cm assembled
• Size: Internal Thread dia 20mm
• Can change 8mm barbed outlet to any other 1/2 inch threaded connector, see related products

Item # TS-BH20-S

Aquarium Bulkhead and Valve Tap Fitting Set 1/2 inch BSPT to 90 degree elbow

• Size: Internal Thread dia 20mm
• Suit 36-40mm dia glass hole size
• Can change elbow to any other 1/2 inch threaded connector, see related products

Item # TS-QC12mm

Aquarium Double Tap Quick Release Connector 12mm

• With integrated shut-off valves
• Cleaning the filter is much easier without the mess
• Robust and long life
• Disconnect and connect the hose safely, cleanly and without ...

Item # TS-QC16mm

Aquarium Double Tap Quick Release Connector 16mm

• With integrated shut-off valves
• Cleaning the filter is much easier without the mess
• Robust and long life
• Disconnect and connect the hose safely, cleanly and without ...

Item # TS-BH25-S

Aquarium Bulkhead and Valve Tap Fitting Set 3/4 inch BSPT

• Size: Internal Thread dia 25mm
• Suit 36-40mm dia glass hole size

Item # TS-StrainerS20

Aquarium Strainer 20mm Outer Diameter Slip Type

• Made from moulded, impact resistant PVC.

Item # TS-StrainerS25

Aquarium Strainer 25mm Outer Diameter Slip Type

• Made from moulded, impact resistant PVC.

Item # TS-StrainerS32

Aquarium Strainer 32mm Outer Diameter Slip Type

• Made from moulded, impact resistant PVC.

Item # TS-StrainerS40

Aquarium Strainer 40mm Outer Diameter Slip Type

• Made from moulded, impact resistant PVC.

Item # TS-StrainerT20

Aquarium Strainer 20mm Outer Diameter Threaded Type

• Made from moulded, impact resistant PVC.
• Size: 20mm thread dia x 62mm long

Item # TS-StrainerT25

Aquarium Strainer 25mm Outer Diameter Threaded Type

• Made from moulded, impact resistant PVC.
• Size: 25mm thread dia (18mm smooth inner dia) x 70mm long

Item # TS-StrainerT32

Aquarium Strainer 32mm Outer Diameter Threaded Type

• Made from moulded, impact resistant PVC.
• Size: 32mm thread dia x 80mm long

Item # XY-SSS-6M

WALKINGFARM Stainless Steel Lid Bracket 6mm

• Stainless Steel Lid Brackets for use on Frameless Aquariums.  Comes in a set of 4 pieces, one for each corner of the tank.
• Size: Suitable for tanks with 6mm glass
• Glass lid not ...

Item # XY-SSS-8M

WALKINGFARM Stainless Steel Lid Bracket 8mm

• Stainless Steel Lid Brackets for use on Frameless Aquariums. Comes in a set of 4 pieces, one for each corner of the tank.
• Size: Suitable for tanks with 8mm glass
• Glass lid not ...

Item # XY-SSS-10M

WALKINGFARM Stainless Steel Lid Bracket 10mm

• Stainless Steel Lid Brackets for use on Frameless Aquariums. Comes in a set of 4 pieces, one for each corner of the tank.
• Size: Suitable for tanks with 10mm glass
• Glass lid not ...

Item # 270576BK

Aquarium Bulkhead with O Ring PVC 21mm Inner Diameter

• Made from moulded, impact resistant PVC.
• Elbows and strainers also available in slip fittings.
• Threaded fitting on outside.
• Passes water through sides or bottom of ...

Item # AM41725

Aquarium Bulkhead with O Rings ABS 26.75mm Inner Diameter

• Made from ABS plastic.
• Threaded fitting on outside.
• Passes water through sides or bottom of tanks.
• Suit 25mm (outer diameter) PVC pipe.
• Suit glass hole size: ...

Item # AM41732

Aquarium Bulkhead with O Rings ABS 33.55mm Inner Diameter

• Made from ABS plastic.
• Threaded fitting on outside.
• Passes water through sides or bottom of tanks.
• Suit 32mm (outer diameter) PVC pipe.
• Suit glass hole size: ...

Item # AM41740

Aquarium Bulkhead with O Rings ABS 40mm Inner Diameter

• Made from ABS plastic.
• Threaded fitting on outside.
• Passes water through sides or bottom of tanks.
• Suit 40mm (outer diameter) PVC pipe.
• Suit glass hole size: ...

Item # TSBulkT20mm

Aquarium Bulkhead 1/2 inch with O Rings PVC 20mm Inner Diameter

• Threaded fitting on inside/outside.
• Passes water through sides or bottom of tanks.
• Suit glass hole size: 35mm - 39mm

Item # TSBulkT25mm

Aquarium Bulkhead 3/4 inch with O Rings PVC 25mm Inner Diameter

• Threaded fitting on inside/outside.
• Passes water through sides or bottom of tanks.
• Suit glass hole size: 36mm - 39mm

Item # TSBulkT32mm

Aquarium Bulkhead 1 inch with O Rings PVC 32mm Inner Diameter

• Threaded fitting on inside/outside.
• Passes water through sides or bottom of tanks.
• Suit glass hole size: 45mm - 49mm

Item # H/S-22

Diamond Coated Glass Hole Saw 22mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 22mm (7/8") diameter hole size.
• Suitable for standard 15mm bulkhead fitting.
• Made in Hong ...

Item # H/S-28

Diamond Coated Glass Hole Saw 28mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 28mm (1 1/8") diameter hole size.
• Suitable for standard 20mm bulkhead fitting.
• Made in Hong ...

Item # H/S-35

Diamond Coated Glass Hole Saw 35mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 35mm (1 3/8") diameter hole size.
• Suitable for standard 25mm bulkhead fitting.
• Made in Hong ...

Item # H/S-42

Diamond Coated Glass Hole Saw 42mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 42mm diameter hole size.
• Suitable for standard 32mm bulkhead fitting.
• Made in Hong ...

Item # H/S-45

Diamond Coated Glass Hole Saw 45mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 45mm (1.75") diameter hole size.
• Suitable for standard 40mm bulkhead fitting.
• Made in Hong ...

Item # H/S-50

Diamond Coated Glass Hole Saw 50mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 50mm (2") diameter hole size.
• Suitable for standard 40mm bulkhead fitting.
• Made in Hong ...

Item # H/S-60

Diamond Coated Glass Hole Saw 60mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 60mm (2 3/8") diameter hole size.
• Suitable for standard 50mm bulkhead fitting.
• Made in Hong ...

Item # GPS-DA/19

Flow Accelerator Duck Bill 3/4 inch 19mm Inner Diameter

Flow accelerators are designed to add increased and varied directional flow patterns to aquariums. When used as the plumbing return fitting these units greatly enhance your aquariums flow.

More info...


Your Price AU$26.20

Item # FV-2BKA

Adjustable Float Valve with bracket and 2m tubing Set A

• Suit up to 15mm glass wall to mount
• Made of non-toxic food grade material
• 2metres tubing included
• Parts list:
  1 x Direct joiner
  1 x Elbow joiner
  More info...
  
  
  Your Price AU$16.95

Item # FV-2BKE

Adjustable Float Valve with adjustable height bracket and 2m tubing Set E

• 3-15cm adjustable depth
• Suit up to 15mm glass wall to mount
• Made of non-toxic food grade material
• 2 metres tubing included
• Parts list:
  1 x Direct ...

Item # FV-2

Adjustable Float Valve Small 145mm

• Adjustable and compact
• Can be used for drinking water
• 145x40x40mm overall size
• Drill hole size:16mm

Item # UTube-19/25

Odyssea U-Bend Return Pipe 19-25mm

• U-Bend outflow pipe with fanned end.
• Suits 19-25mm tubing (tight fit).
• Adjustable outflow via 2 ball joints.
• Can fit over to 50mm wide ...

Item # TS-ON-20mm

Water Output Nozzle Duckbill

• Overall length: 79mm, Duckbill section:28x8mm

Item # TS-DA-20mm

Flow Accelerator Duck Bill Type Small Nozzle

Flow accelerators are designed to add increased and varied directional flow patterns to aquariums. When used as the plumbing return fitting these units greatly enhance your aquariums flow.

More info...


Your Price AU$9.95

Item # TS-DA-25mm

Flow Accelerator Duck Bill Type Small Nozzle

Flow accelerators are designed to add increased and varied directional flow patterns to aquariums. When used as the plumbing return fitting these units greatly enhance your aquariums flow.